For proper operation, ensure the following:
1. GFCI plug has the “reset” button depressed. If the “test” button is depressed, there will be no power supplied to the spot cooler.
2. Garden hoses connected to the appropriate “water inlet” and “water outlet” ports on the rear of the spot cooler. Water inlet is the supply water coming from your water source. Water outlet is the discharge water from the spot cooler – to be dumped into a nearby drain, sink, etc. Ensure blue condensate hose is connected “drain outlet” port.
Note: FOR PROPER OPERATION, WATER SUPPLY PRESSURE SHOULD BE BETWEEN 28 AND 71 PSIG.
Note: IF WATER IS SUPPLIED FROM A SINK, ENSURE HOT WATER IS NOT TURNED ON. COLD WATER ONLY.
See diagram below:
If unit will be stored in potentially freezing temperatures, the remaining water in the spot cooler must be drained to prevent damage. Please follow instructions below.